HOHM Tech XL Batteries 2pk
The Hohm Tech Hohm RUN XL 21700 represents an elite, high-performance hardware energy solution engineered for heavy-amperage, power-hungry applications. This retail-ready wholesale layout is systematically configured to house 2 individual flat-top cells per retail pack, securely isolated to eliminate terminal bridging or structural short-circuiting during shipping and warehouse handling. Designed specifically for volume-distributor staging bays, modern vape lounges, and advanced electronic retail platforms, this pre-packaged pair optimizes storefront checkout footprints while integrating standard, scannable tracking metrics for simple inventory logistics.
The RUN XL cell features a proprietary QSP (Quad Stripping Process) Li-NMC formulation, which has undergone years of strict R&D to refine the Cobalt Oxide ratio and graphite purity. This state-of-the-art matrix delivers an exceptional 4007mAh nominal capacity alongside a massive 30.3A Maximum Continuous Discharge Rating (CDR) and an 80°C temperature-limiting cut-off ceiling at 38.6A. Built to operate significantly cooler under load than traditional 21700 cells, its internal architecture limits voltage sag, providing incredibly stable, linear power transmission even during prolonged high-velocity deployment.
This dual-cell hardware configuration serves as an essential inventory asset for specialty storefronts stocking high-wattage pod mods, high-output portable lighting, and custom battery packs. Emphasizing premium commercial safety, each cell features an upgraded, modified cathode tag constructed of Ultra-High Purity Aluminum (UHP Al) to drastically reduce internal resistance, alongside a refined bitumen poly seal for total internal pressure management. Approved for rapid-charging protocols up to an astonishing 6.01A under strict safety parameters, this 2-pack collection provides commercial distributors and retail partners with a highly secure, chart-topping power tier that drives immediate customer retention.
Packaging Hierarchy Breakdown
| Packaging Tier | Structural Components | Total Hardware Inventory |
| 1 Retail Pack | Sealed Protective Cardboard Dual Slit Sleeve | 2 Rechargeable Flat-Top Cells |
| Authenticity Core | Factory PVC Wrap and Insulated Protection Rings | 2 Untampered Factory Units |
| Wholesale Tracking | Batch Identification and External UPC Panels | Point-of-Sale Ready Asset |
Product Specifications
| Feature | Technical & Hardware Dimensions |
| Cell Size Classification | Standardized 21700 Cylindrical Profile (Flat Top) |
| Chemical Composition Build | Advanced Proprietary QSP Lithium Nickel Manganese Cobalt (Li-NMC) |
| Nominal Energy Capacity | 4007mAh Volume Footprint |
| Continuous Discharge Rating | 30.3A Maximum CDR (Constant Continuous Output) |
| Max Pulse Discharge Limit | Rated at 38.6A Controlled Boundary Cut-off (< 5 sec on / > 30 sec off) |
| Nominal & Max Volt Limit | 3.6V Baseline | Fully Charged Peak Voltage at 4.2V |
| Rapid Charging Tolerance | Fully Tested and Approved for High-Velocity 6.01A Input |
| Safety Certifications | Certified by UN38.3, EN62133, IEC62133 2nd Edition, and UL1642 Labs |
Mechanical Priming & Deployment Protocol
-
The Inspection Cycle: Before inserting the dual cells into any multi-battery device, battery pack assembly, or charging dock, carefully inspect the outer plastic heat-shrink wrap and top terminal insulators. If any tears, deep scratches, cuts, or raw metal exposures are present along the battery walls, do not utilize the cell; it must be completely re-wrapped or safely recycled immediately.
-
The Symmetrical Charging Factor: When utilizing these batteries inside a multi-cell host device, always charge and discharge them together as a matched pair (“married cells”). This ensures symmetrical cycle wear, equal internal resistance profiles, and uniform voltage output across the device’s operational lifespan.
-
The Storage Framework: Never carry loose batteries inside a pocket, purse, or bag alongside keys, coins, or loose change. Loose metal objects can bridge the positive and negative terminals instantly, provoking an immediate high-amperage short circuit, extreme thermal runaway, or severe outgassing.
Warning
- 21+ only — adult consumer mechanical hardware use only. Keep entirely out of reach of children, minors, and family pets.
- Unprotected Cell Risk: This is an unprotected flat-top cell intended strictly for integration into protected hardware circuits or devices engineered with built-in electronic regulatory boards, or a dedicated Battery Management System (BMS). It lacks an independent internal PCB protection circuit.
- Do not heat over 100°C (212°F), incinerate, puncture, crush, or submerge the cells in liquid environments.
- Always use a high-quality external smart charger equipped with automatic overcharge cutoff limits to manage daily replenishment cycles safely.
NOTE: Replacement mechanical hardware utility accessory description only. Contains zero tobacco, nicotine, or active botanical extracts. Compliance with all local hazardous material transportation and battery disposal regulations remains the sole responsibility of the wholesale distributor and retail store owner.