Geekvape B60 Kit

The Geekvape B60 Kit—widely recognized as the Aegis Boost 2—represents a high-durability, advanced performance evolutionary leap within the compact pod mod category. Engineered for adult consumers who require an active-lifestyle setup, the B60 combines a pocket-friendly footprint with structural reinforcement. Wrapped in an upgraded zinc-alloy chassis with ergonomic leather paneling, the device features Geekvape’s signature IP68-rating Tri-proof tech architecture. This military-grade framework provides comprehensive protection against water submersion, dust entry, and accidental drops or heavy physical shocks.

The technical core of the B60 is driven by a high-density, integrated 2000mAh rechargeable battery linked to an advanced AS-Chip 3.0 processing engine. This intelligent chipset handles a variable power band from 5W to 60W and introduces a specialized SMART Mode that automatically detects the installed coil’s resistance to set the ideal wattage ceiling, preventing accidental dry hits. A curved, flush 0.96-inch TFT color screen covers the front interface, displaying battery status, live resistance ratings, and voltage levels. For safety during transportation, the chassis integrates a physical A-Lock mechanical slider switch along the side, which disables the firing mechanism instantly without needing to turn off the power.

The assembly is paired with a clear, top-fill 5.0ml refillable pod constructed from impact-resistant food-grade PCTG. The pod features an engineered top-airflow leakproof structure, directing incoming air down the side channels into the lower core to enhance fluid dynamics and flavor production. The system is natively compatible with the high-velocity Geekvape B Series Coil ecosystem, utilizing a plug-and-play press-fit installation technique to ensure a tight, worry-free mechanical seal.

Product Specifications

Starter Kit Package Contents

• 1 × Geekvape B60 (Aegis Boost 2) Mod Battery Hardware

• 1 × Geekvape B60 Refillable Pod (5.0ml Capacity Pre-installed)

• 1 × Geekvape B Series 0.2$\Omega$ Mesh Coil (Pre-installed | Rated for 50W–58W)

• 1 × Geekvape B Series 0.6$\Omega$ Mesh Coil (Spare Boxed | Rated for 15W–25W)

• 1 × Mechanical Coil Dislodging Tool

• 1 × High-Speed Type-C USB Charging Cable

• 1 × User Manual & Quality Control Documentation

Operating System Modes

• SMART Mode: Ideal for everyday convenience, the AS-Chip 3.0 reads the exact coil resistance and automatically locks in the optimal performance range to protect the organic cotton wick from burning.

• BOOST Mode: Tailored for cloud-chasing profiles, this mode automatically coaxes the maximum voltage from the battery cell during draw activation, delivering a hard-hitting, consistent vapor stream from start to finish.

Mechanical Priming & Deployment Protocol

• The Saturation Cycle: Before seating a new mesh coil into the pod, drip 3 to 4 drops of liquid directly down into the central chimney and onto each of the exposed exterior wicking slots.

• The Resting Window: Once the press-fit coil is pushed firmly into the lower pod receptacle and the 5ml reservoir is filled, allow the assembly to sit undisturbed for a minimum of 5 to 10 minutes. This allows complete capillary saturation of the dense cotton core, avoiding dry hits or instant grid charring upon initial firing.

Warning

• 21+ only — adult consumer hardware use only.
• Never submerge the device in water with an unsealed Type-C port or cracked pod housing.
• Turn off the power or slide the physical A-Lock to the locked position before putting the mod in pockets, bags, or storage compartments.
• Keep strictly out of reach of children, minors, and family pets.

NOTE: Replacement mechanical hardware kit only. Contains no tobacco, nicotine, or active botanical extracts. Compliance with all local regulations is the sole responsibility of the user.

AVAILABLE AT MASTER DISTRIBUTOR.