Geekvape Supermesh X1 0.2 Coil 10pk 5ct
The Geekvape Supermesh X1 Master Pack is a bulk-packaged collection of classic sub-ohm replacement coils. This configuration consolidates a total of 50 individual coils, organized into 5 large boxes, with each box containing 10 individual retail packs (5 coils per pack). Each coil is factory-sealed inside its own plastic blister pocket to preserve the organic cotton wicking matrix and shield it from ambient humidity, dust, and contaminants until it is ready for deployment.
From a technical perspective, the Supermesh X1 coil features a low-resistance sub-ohm core designed for dense vapor and robust flavor. Built with a premium Kanthal A1 (KA1) mesh grid sheet, this heating element operates optimally within a 60W to 70W range (with an absolute operational spectrum of 30W to 90W). The mesh grid layout distributes thermal energy evenly across the wick, vastly accelerating ramp times and maximizing liquid vaporization efficiency compared to traditional round-wire setups. Utilizing high-purity multi-layer organic cotton, the threaded installation design screws securely into the tank base to form a stable, leak-resistant mechanical seal.
These coils function as an incredibly versatile hardware engine across multiple generations of sub-ohm gear. They are natively compatible with flagship Geekvape platforms—including the Cerberus Sub-Ohm Tank, Aero Mesh Tank, and Shield Sub-Ohm Tank. Additionally, due to standard cross-compatibility engineering, they fit several other prominent platforms that utilize the classic small-form sub-ohm core design (such as the SMOK TFV8 Baby and TFV9 tank series).
Packaging Hierarchy Breakdown
| Packaging Tier | Quantity Content | Total Component Inventory |
| 1 Master Bundle Unit | Contains 5 Large Outer Boxes | 50 Individual Coils |
| 1 Large Outer Box | Contains 10 Individual Retail Packs | 10 Coils Per Box |
| 1 Individual Retail Pack | Contains 5 Blister-Sealed Coils | 5 Coils Per Pack |
Product Specifications
| Feature | Technical & Hardware Dimensions |
| Coil Core Designation | Geekvape Supermesh X1 Core Series |
| Heating Element Composition | Premium Kanthal A1 (KA1) Mesh Grid Sheet |
| Electrical Resistance | Precise 0.2$\Omega$ Sub-Ohm Rating |
| Operational Wattage Range | 60W – 70W (Optimal Balance Range) | 30W – 90W (Absolute Max) |
| Vaping Style Alignment | Direct-to-Lung (DTL) Vaping Profiles |
| Wicking Material Matrix | 100% Medical-Grade Multi-Layer Organic Cotton |
| Installation Mechanic | Threaded Core Screw-In System |
| Primary Tank Compatibility | Geekvape Cerberus | Aero Mesh | Shield Tanks |
Mechanical Priming & Deployment Protocol
-
The Saturation Cycle: Before threading the fresh coil into the base of the tank, drip 3 to 4 drops of e-liquid directly down into the central mesh chimney and onto each of the exposed organic cotton side wicking slots.
-
The Resting Window: Once the coil is firmly screwed into the tank base and the glass reservoir is filled, allow the setup to sit completely undisturbed for a minimum of 5 to 10 minutes. This ensures complete capillary saturation of the dense cotton core, eliminating dry hits or instant grid charring upon initial firing.
-
Gradual Ramp Up: When firing the new coil for the first time, it is best practice to set the device to a lower power setting (around 45W–50W) and take a few short pulls before adjusting up to the optimal 60W–70W performance tier.
Warning
- 21+ only — adult consumer hardware component use only.
- Low-resistance sub-ohm apparatus; intended solely for high-power regulated mods capable of safely firing at 0.2$\Omega$ tolerances.
- Never fire dry or unprimed mesh elements, as the cotton will immediately burn and permanently ruin flavor delivery.
- Keep strictly out of reach of children, minors, and pets.
NOTE: Replacement mechanical hardware accessory only. Contains no tobacco, nicotine, or active botanical extracts. Compliance is the sole responsibility of the user.