Smok TFV9 Coil 0.15Ω 5pk

Category: SKU: N/A

The Smok TFV9 Coil 0.15 Ω 5pk is engineered for maximum vapor production and flavor consistency. Built with high-quality Kanthal mesh, these coils provide rapid, even heating and long-lasting durability, making them a reliable choice for both casual and advanced users.

🚀 Features

  • 🔋 0.15 Ω Meshed Coil Structure — Delivers dense vapor clouds and pure flavor with efficient heating.
  • High-Quality Kanthal Material — Ensures durability and consistent performance at high wattages.
  • 💨 Wide Heating Surface Area — Enhances vaporization efficiency for smoother draws.
  • 🧩 Compatible with TFV9 Tank Series — Designed for seamless fit with Smok TFV9 and compatible sub-ohm tanks.
  • 📦 Retail-Ready Packaging — Includes five (5) replacement coils per pack; perfect for retail display and wholesale.

Smok TFV9 Coil 0.15Ω 5pkProduct https://mastersmokedistributor.com/wp-content/uploads/2025/03/masterlogoo.png

The SMOK TFV9 Replacement Coils are high-performance heating elements designed specifically for the SMOK TFV9 Sub-Ohm Tank, famously featured on the Scar-18 and Rigel kits. These coils feature a resistance of 0.15Ω (often marketed as 0.1Ω in various regions) and utilize a Meshed internal structure. This mesh design provides an expanded surface area, resulting in massive vapor production and intense flavor saturation for a premium direct-to-lung (DTL) experience.

A significant advantage of the TFV9 coil is its cross-compatibility; it is designed to be interchangeable with the legendary TFV8 Baby Coil series, allowing you to use these coils in a wide range of older SMOK tanks and third-party devices.

Product https://mastersmokedistributor.com/wp-content/uploads/2025/03/masterlogoo.pngCore Specifications

  • Coil Type: V9 Meshed Coil.

  • Material: High-quality Nichrome (NiCr) and organic cotton.

  • Resistance: 0.15Ω.

  • Recommended Wattage: 40W – 90W (Optimized for performance at 50W – 60W).

  • Compatibility: SMOK TFV9 Tank, TFV8 Baby Tank, TFV8 Big Baby Tank, and TFV12 Baby Prince.

  • Quantity: 5 individual coils per pack.

Quick Installation Guide

  1. Prime the Coil: Drip 4–5 drops of e-liquid directly into the center of the mesh and onto the side wicking ports.

  2. Install: Screw the coil firmly into the base of the tank. Ensure it is tight to maintain a proper electrical connection and prevent leaking.

  3. Fill & Saturate: Reassemble the tank, fill with e-liquid, and wait 10–15 minutes. Because of the high-wattage nature of these coils, the cotton must be completely saturated before firing.

  4. Break-In: Start at a lower wattage (approx. 40W) and gradually increase to your preferred setting over the first few hits.

Product https://mastersmokedistributor.com/wp-content/uploads/2025/03/masterlogoo.png

WARNINGS & SAFETY:

  • Wattage Control: Do not exceed 90W. Firing these coils at excessively high wattages will burn the cotton wicking and significantly shorten the coil’s lifespan.

  • Liquid Compatibility: These are sub-ohm coils designed for High-VG (70/30 or 80/20) freebase e-liquids. They are not recommended for high-strength nicotine salts.

  • Battery Safety: Ensure your mod is using high-drain 18650 or 21700 batteries that are in good condition and capable of handling a 60W+ continuous discharge.

  • Heat Management: Sub-ohm vaping generates significant heat. If the tank becomes uncomfortably hot to the touch, allow it to cool down for several minutes.

  • Adult Use Only: Strictly for adults 21+. Keep out of reach of children and pets.

Note: The TFV9 Mesh coil is favored by “cloud chasers” for its ability to produce thick, warm vapor without sacrificing the nuances of complex e-liquid flavors. To extend the life of your 5-pack, avoid e-liquids with very high sweetener content, as these can cause “coil gunk” to build up on the mesh faster. Replace the coil as soon as you notice a persistent burnt taste or a significant drop in vapor density.

Product https://mastersmokedistributor.com/wp-content/uploads/2025/03/masterlogoo.pngAVAILABLE AT MASTER DISTRIBUTOR.

Weight 1 lbs
Dimensions 1 × 1 × 1 in
Quantity

1ct, 10ct